Motorola ic402 - Manual (Page 76)

62 Section 2A: Making and Answering Calls
However, you cannot initiate a call when the code is set to
Receive All. If you press the Walkie-Talkie button to initiate a
Walkie-Talkie call and your code is set to Receive All, you
receive an error message.
To set the code to Receive All:
1. In Direct Talk mode, press Options (right softkey) and
then select Edit Channel/Code.
2. With Channel number field highlighted, use your up and
down navigation keys to set a channel number and
press
O
.
3. Select Receive All and press
O
.
4. Select Done (left softkey).
Making Emergency Calls While in Direct Talk Mode
If you attempt to make an emergency 911 call while in Direct
Talk mode, your phone automatically exits Direct Talk mode
and attempts to find a network signal.
If you are out of network coverage, your phone cannot make
an emergency 911 call until you return to a network coverage
area. You must wait until the phone reconnects to a network
before attempting to make an emergency 911 call.