Motorola 280 - Manual (Page 158)

Data and Fax Calls
156
Note: Check your computer or hand-held device to determine
the type of cable you need.
Attaching a Serial Cable
Use the interchangeable head on the Motorola Multi-Connect
Serial Cable to connect a computer, Palm III device, or Palm V
device to your phone.
Do This
1 Plug the serial cable
into the detachable
head. Make sure
that the Motorola
logo on the
detachable head
and the metal
shielding on the
serial cable plug are
both facing you.
2 With the Motorola
logo and the phone
both facing you,
plug the detachable
head into the
phone’s accessory
connector port.
3 Plug the other end of the cable into the serial interface
connection on the external device and tighten the screws.