MITSUBISHI ELECTRIC FX 2N -16 - Manual (Page 18)

FX2N Series Programmable Controllers Introduction 1
1-8
*
FX Special functions blocks must be connected at the right end of the system using the FX 2N -
CNV-IF convertion interface.
Des blocs de fonctions spéciales FX doivent être connectés à l’extrémité droite du système en
utilisant l’interface de conversion FX
2N
-CNV-IF.
Die FX-Sondermodule müssen an der rechten Seite der Systemkonfiguration über die
Schnittstelle FX
2N -CNV-IF angeschlossen werden.
I blocchi delle funzioni speciali FX devono essere collegati con l’estremità destra del sistema
usando l’interfaccia di conversione FX
2N
-CNV-IF.
El bloque funcional especial FX debe ser conectado al extremo derecho del sistema a través
de la interfase de conversión FX
2N
-CNV-IF.
Table 1.6:
MODEL DESCRIPTION
NUMBER
OF I/O
POWER SUPPLY DIMENSIONS
MASS
(WEIGHT)
I O
Internal
5V DC
External
24V DC
mm
(inches)
kg
(lbs)
FX-2DA Digital to analog converter - 8 - 30mA 130mA
73 (2.9)
140
(5.5)
95
(3.7)
0.5 (1.1)
FX-4DA Digital to analog converter - 8 - 30mA 200mA 0.3 (0.66)
FX-4AD Analog to digital converter - 8 - 30mA 50mA
0.5 (1.1)
FX-2AD-PT PT100 probe interface - 8 - 30mA 50mA
FX-4AD-TC Thermo-couple interface - 8 - 40mA 60mA
FX-1HC High speed counter - 8 - 70mA -
FX-1PG-E Pulse output, Position control - 8 - 60mA 40mA
45 (1.8) 0.3 (0.66)
FX-16NP/NT Net-mini interface 16 8 80mA 120mA
FX-16NP/NT-S3 Net-mini-S3 interface 8 8 8 80mA 100mA 73 (2.9) 0.4 (0.88)
FX-1GM Position Control (1 axis) - 8 - AC supply
160
(6.3)
140
(5.5)
95
(3.7)
1.5 (3.3)
FX-10GM Position Control (1 axis) - 8 - - 210mA 50 (1.9)
0.4 (0.88)
FX-20GM Position Control (2 axis) - 8 - AC supply
110
(4.3)
ENG - Special function blocks FRE - Modules spéciaux GER - Sondermodule
ITL - Moduli speciali ESP - Módulos especiales blocks
ENG
FRE
GER
ITL
ESP