Monarch Instrument 9460 - Manual (Page 87)

Telnet Console Commands 6-15
SEt IP SUbnet aa.bb.cc.dd
Sets default subnet mask.
SEt IP TCP [EN/DIS]
Selects whether to use the raw TCP (port 9100) protocol.
SEt IP TELNET [EN/DIS]
Selects whether to use the Telnet protocol.
SEt IP TFTP [EN/DIS]
Selects whether to use the TFTP protocol.
SEt IP TImeout n
Sets timeout (n) in minutes.
SEt IP TRAP n ADDR
Sets the destination IP address and optional port number to specify where to send
the trap (n). If the port is not specified, it defaults to 162.
SEt IP TRAP n POrt n
Specifies the port that will be scanned for trigger conditions. The parameter is a bit
mask.
SEt IP TRAP n TRIGger cccc
Specifies the trigger conditions (cccc) that send a trap (n). The parameter is a
bit mask.
1 On line
2 Off line
4 (not used)
10 Paper out
20 Paper jam
8000 Printer error
SEt IP WIndow nn
Sets the LPD/TCP maximum window size (nn).