Monarch Instrument 9460 User Manual
Page 22
2-12 System Administrator’s Guide
Setting the Protocol
This option sets the protocol.
1. From the Configure menu, select Protocol: TCP or LPD.
Protocol
3
TCP
X LPD
E U
D
2. Use
A under D to select the protocol you want. For example, if you
select LPD, you must specify a raw printer port:
Port
+
09100
E U
+
Use
A as shown in the following table:
E
Press
A to
R
Press
A to
+
Press
A to
Saves the setting
Scrolls through the
positions from left to right
Toggles between + or –;
also
increments the current
position setting by 1
3. Press
A under E to save the setting. You return to the Configure menu.