Monarch Instrument 9460 - Manual (Page 17)

Configuring the 802.11b/g and IP Settings 2-7
6. Press A under D until Setup is highlighted.
Setup
Service
E U D
7. Press A under E to select Setup.
8. From the Setup menu, press A under D until you see RF Network.
Press A under E to select RF Network.
The following menu shows the RF Network options.
The RF Network menu allows you to check the printer’s status, configure the
RF network settings, print RF settings, and reset the radio.
To exit, press
F at any time.
Status Configure Reset Exit
RF
Network
Print Info