Monarch Instrument 9460 - Manual (Page 83)

Telnet Console Commands 6-11
SEt NW CHannel nn
Sets 802.11b/g wireless channel.
SEt NW ENC [DIsable/64/128/WPA/WPA2/WPA2-WPA]
Sets the encryption mode. See Chapter 4, “Using a Web Browser” for more
information.
SEt NW ID
Sets the authentication user ID. It may include the realm, separated with the at
(“@”) character.
SEt NW INAP [PAP/MSCHAP_V2]
Sets the EAP inner authentication protocol.
SEt NW IROAM [DISable/STRICT/FLEXible]
Controls whether the radio frequencies are set based on the radio configuration or
from its access point. Disabled uses the radio defaults. Flexible uses access point
settings if present, otherwise the radio defaults are used. Strict uses access point
regulatory frequency information.
SEt NW KEY# <1/2/3/4>
Sets which WEP key number to use (default is 1).
SEt NW KEYVAL
Sets WEP key value. Must be hexadecimal.
SEt NW MOde [INfra/ADhoc]
Sets 802.11b/g wireless mode to infrastructure or Ad-Hoc mode.
SEt NW PW
Sets the password for 802.11b/g EAP authentication.
SEt NW REALM
Sets the realm portion of the 802.11b/g EAP authentication ID.
SEt NW RTS n
Sets the network RTS threshold. Range is 1-3000.