Minolta CF2001P - Manual (Page 74)

Control Panel Messages 5
CF2001P 5-9
To add toner
1 Open the toner supply door, and
then open the toner hopper lid for
the toner that you wish to refill.
❍ For example: If the yellow toner
is empty, open the leftmost ton-
er hopper lid.
2 With the opening of the new toner
bottle pointing up, hit the bottom of
the bottle against a strong surface,
such as a desk or table, four or five
times from a height of about 4 in. (10
cm). (Since the toner within the
bottle may have become
compacted, be sure to break it up by
performing this step.)
? Is the toner bottle being held
correctly?
➜ When hitting the toner bottle
against a surface, be sure to
hold the bottle so that the open-
ing of the bottle is pointing up.
3 While firmly grasping the new toner
bottle, shake it well.
? Is the toner within the bottle
hard?
➜ The toner within the bottle may
become compacted. If it does,
be sure to shake the bottle until
the toner is mostly broken up be-
fore adding it to the hopper.