Monessen Hearth ILDV20PV - Manual (Page 27)

83D0511
ILDV20/ILDV30 Fireplace Insert
7
OPeRAtiNG iNStRuctiONS
PILOT
OF
F
PILOT
O
N
Figure 30 - Off Position
OF
F
PILO
T
ON
PILOT
FP1937
control knob on
PILOT
OF
F
PI
LO
T
ON
ON
OFF
FP1939
fan control knob
LiGhtiNG BuRNeR
MAiN BuRNeR SWitch
The “ON/OFF” switch for the main burner can be found on the right side of insert surround. This
switch allows you to turn on and to turn off the main burner without using the gas valve knob.
Make sure the button is in the “ON” position to light the main burner. Figure 27
LiGhtiNG the BuRNeR
Depress and turn the knob counterclockwise
to the “ON” position. Figure 28 It will take less
than four (4) seconds for the burner to ignite.
PiLOt POSitiON
Depress and turn knob to pilot position to keep burner off while maintaining the pilot light. Figure
29
Depress and turn knob clockwise to “OFF” posi-
tion. Figure 30
tO tuRN OFF GAS
ADjuStiNG BLOWeR SPeeD
The internal blower helps transfer heat from heater into room.
It will not turn on until heater is up to temperature (approxi-
mately 10 minutes after starting).
To turn blower off, turn knob all the way counterclockwise
. One click clockwise turns blower to high speed. Turn-
ing knob clockwise from high position decreases speed
of blower. Figure 31
Figure 31 - Blower Knob
Figure 28 - On Position Figure 29 - Pilot Position Figure 27 -
On/Off Switch