MITSUBISHI ELECTRIC WD-62526 - Manual (Page 33)

Chapter 3. TV Operation 33
On-Screen Information
When you turn on the TV, change devices, change channels, or when you press the INFO key on the remote
control, the TV displays the current status. Below are the most common displays. Please note that seldom
or never do all of the different status indicators appear at the same time.
Analog Program
Figure 4
1. Antenna or Device being viewed
2. Analog channel being received: If antenna
being viewed
3. Channel name (if manually programmed)
4. Signal Type being received
Possible:
ANT 1 or Input 1,2 – 480i
Component 1, 2 – 480i, 480p, 720p or 1080i
5. Screen format being used
Possible:
Analog 480i /480p signals – Standard,
Expand, Zoom, Stretch, Stretch Plus, Narrow
720p/1080i signals - Standard, Wide Expand
6. Stereo and/or SAP being broadcast
7. V-Chip Ratings
8. Channel in SuperQuickView bank 2
9. Day and Time
10. Sleep Timer remaining time
11. PIP source and channel
12. Audio Mute on
Digital Program
Figure 5
1. Digital Major and Sub channel number
2. Digital Channel Name (only if broadcast)
3. Signal Type being broadcast/received
Possible: SD 4:3, SD 16:9 or HD
4. Screen format being used
Possible:
SD 4:3 - Standard, Expand, Zoom, Stretch,
Stretch Plus, Narrow
SD 16:9 or HD - Standard, Wide Expand
5. Language(s) being broadcast
6. Program Name (if broadcast)
7. Copy-Protection Status
Possible:
COPY ONCE: Program can be recorded
COPY NO MORE: Program can never be
recorded.
ANT 1 3 XXXX ANT 1 3
480i Standard
Stereo SAP
TV-PG DLSV
SQV2
Monday 11:00 AM
Sleep Timer: 30
MUTE 12
6 7
2
1
3
8
9
4
5
10
11
ANT 1 42-1 XXXXXXX XXXXXXXXXXXXXX
HD Standard
English
TV-PG DLSV Copy Once
SQV2
Monday 11:00 AM
Sleep Timer: 30
6 2 1
3
4
5
7
Figure 4. Analog program on-screen display
Figure 5. Digital program on-screen display