MITSUBISHI ELECTRIC WD-62526 - Manual (Page 20)

20 Chapter 1. Television Overview
TV Back Panel
1. ANT 1 (Antenna)
ANT 1 can receive digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/
analog cable source.
2. INPUT 1 and 2
( Audio/ Video 1 and 2)
Use INPUT 1 and 2 to connect a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver, or other
A/V device to the TV. INPUT 1 and 2 accept standard RCA-type left and right stereo audio plugs, S-Video,
and composite video. Please note that if you connect to the S-VIDEO input, the VIDEO input is automatically
deactivated.
3. COMPONENT 1 and 2
YPbPr (480i/480p/720p/1080i)
Use these inputs to connect devices with component video outputs, such as a DVD player, external HDTV receiver,
or compatible video game system. Please see Appendix C for signal compatibility.
COMPONENT
YPbPr (480i/480p/720p/1080i) INPUT
1 2
S-VIDEO
VIDEO
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
DTV/CABLE/
VHF/UHF
DIGITAL
AUDIO
OUTPUT
1 2
Y
Pb
Pr
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
OUTPUT
AUDIO
OUTPUT
RECORD
OUTPUT
DVI
Analog Audio
1 2
VIDEO
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
SERVICE
PORT
MONITORLINK™/HDMI
VIDEO 480i/480p/720p/1080i
AUDIO PCM LINEAR
1 2
INPUT
ANT 1