MITSUBISHI ELECTRIC WD-62526 - Manual (Page 17)

Chapter 1. Television Overview 17
STATUS Indicator
Indicator Color TV Condition Additional Information
None (indicator off) Normal TV on or standby condition. Normal operation.
Yellow, steady
1. Operating temperature is too high;
dust filter may need cleaning.
See Appendix E concerning dust filter cleaning. TV
will not operate when the dust filter is clogged and
internal temperature rises too high.
2. Room temperature is too high. TV will not operate when the ambient room tempera-
ture is too high. Turn off the TV and wait until the
room temperature drops.
Yellow, blinking
Dust filter cover is not in place or not
secure. TV will not operate until the dust filter cover is
securely in place.
Red, either steady or
blinking
TV may require service.
Turn off the TV and unplug the set from the AC power
source. Wait one minute and then plug the set back
in.
If the LED is still on, contact your dealer or a
Mitsubishi Authorized Service Center. See
www.mitsubishi-tv.com or call 1-800-332-2119 to
receive Authorized Service Center information.
POWER/TIMER Indicator
Indicator Color TV Condition Additional Information
None (indicator off) TV is powered OFF. Normal operation.
Green, steady TV is powered ON. Normal operation.
Green, rapid blinking
1. TV just plugged into AC outlet.
Wait until blinking stops before turning on (approxi-
mately 1 minute). Normal operation.
2. AC just restored after power
failure.
3. TV Rebooting after System Reset
used.
4. TV Rebooting after power fluctua-
tion or receiving abnormal digital
signals from digital channel.
5. You have begun the procedure to
update software from an autho-
rized flash memory device.
For detailed information, see the instructions that
accompany the authorized software update. Impor-
tant: Do not use non-authorized software at any
time.
Green, slow blinking
TV powered off and automatic-on
timer is set.
Normal operation. TV can be turned on at any time.
TV Front Panel, continued