MITSUBISHI ELECTRIC F940GOT-SWD-E - Manual (Page 33)

F940GOT-SWD-E/LWD-E Installation, Wiring and General Specifications 2.
2-5
The power is supplied to the GOT from a PLC or an external power supply unit.
• Connection examples
1) When the power is supplied from an FX Series PLC (Refer to "Cautions on connection" in
the next page.)
Connect the power terminal in the GOT to the 24V DC service power supply in the PLC
basic unit or PLC extension unit.
PLC GOT
24V 0V S/S RUN X0 X1 X2 - +
DC
24V
Class 3
grounding
2A
Class 3
grounding