MITSUBISHI ELECTRIC F940GOT-SWD-E - Manual (Page 10)

F940GOT-SWD-E/LWD-E INTRODUCTION 1.
1-2
1.1 Outline of product
The graphic operation terminal (which may be hereafter
abbreviated as "GOT") is attached on the panel face of a
control panel or an operation panel, and connected to a
program connector in an FX or A Series programmable
controller (which may be hereafter abbreviated as "PLC")
(except the A0J2) inside the control panel.
Not only the CPU port connection method but also the
computer link port connection method is available so that
the GOT can be connected to a PLC other than MELSEC
or a micro computer board.
You can monitor various devices and change the data of
the PLC while checking the screen of the GOT.
There are several display screens built in the GOT which
offer various functions. In addition, you can create display
screens.
The built-in screens (system screens) and the screens
made by the user (user screens) have the following func-
tions respectively.
FX or
A Series PLC
Program
connector
GOT main body