MITSUBISHI ELECTRIC F940GOT-SWD-E - Manual (Page 11)

F940GOT-SWD-E/LWD-E INTRODUCTION 1.
1-3
User screens
1) Screen display function
The screens created by the user can be displayed. The following functions can be assigned
to each screen. And the screens to be displayed can be limited using the security function.
a) Display function
-Up to 500 screens created by the user can be displayed. The screens can be created
using the FX-PCS-DU/WIN-E V2.00 for the DU or using the SW
o
D5C-GOTRE-PACK
("
o
" indicates a numeric not less than 1.) for the GOT. Two or more screens can be
overlaid or changed over.
-Not only characters such as alphabets, numerics, Hiragana, Katakana and Kanji but
also simple graphics such as straight lines, circles and rectangles can be displayed. In
the F940GOT-SWD-E, screens can be displayed in 8 colors.
b) Monitor function
-Set values and current values of word devices in the PLC can be displayed in numerics
or bar graphs for monitoring.
-The specified range of the screen can be displayed reversely in accordance with the
ON/OFF status of bit devices in the PLC.