MITSUBISHI ELECTRIC F940GOT-SWD-E - Manual (Page 12)

F940GOT-SWD-E/LWD-E INTRODUCTION 1.
1-4
c) Data change function
-The numeric data being monitored can be changed.
d) Switch function
-By manipulating the operation keys in the GOT, bit devices in the PLC can be set to ON
and OFF. The display panel face can be assigned as touch keys to offer the switch func-
tion.
Make sure to press a touch key by fingers.
If a touch key is pressed by a hard or sharp object, it may become failed.