Mitel COMMUNICATION DIRECTOR 5320 - Manual (Page 42)

5320 IP Phone – User Guide
Do Not Disturb
When you enable Do Not Disturb, callers will get a busy tone, and an on-screen text
message indicating that you do not wish to be disturbed.
To activate or deactivate Do Not Disturb:
 Press the Do Not Disturb key that you programmed. The key is highlighted when Do Not
Disturb is activated and is not highlighted when Do Not Disturb is not activated. The
phone status line shows the Do Not Disturb icon.
To activate Do Not Disturb from a remote extension:
1.
Lift handset.
2.
Dial the number of the station to which Do Not Disturb is to apply.
3.
Hang up.
To deactivate Do Not Disturb from a remote station:
1.
Lift handset.
2.
Dial the appropriate feature access code.
3.
Dial the number of the station with Do Not Disturb activated.
4.
Hang up.
Emergency Calls
Warning for emergency number dialing: Consult your local authorities for Emergency
Numbers and 911 or equivalent service availability in your area.
There are two methods of dialing emergency numbers, based on the programming of your
3300 ICP:
 Emergency Call Routing NOT programmed
 Emergency Call Routing programmed
CAUTION: Verify with your System Administrator which type of emergency number
dialing you can use.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING NOT PROGRAMMED
If Emergency Call Routing is NOT programmed, Emergency Number dialing should
only be performed by picking up the handset and selecting the Analog Line key you
have programmed.
Emergency dialing using an IP connection may not be supported due to
ICP system configuration and country location. For more information, contact your System
Administrator.
- 36 -