Mitel COMMUNICATION DIRECTOR 5320 - Manual (Page 39)

5320 IP Phone – User Guide
To answer a call that is ringing at another extension not in your Pickup Group:
1.
Lift the handset.
2.
Dial the appropriate feature access code.
3.
Dial the number of the ringing station.
Campon
When you get a busy tone, you can use the Campon feature to be notified when the busy
party becomes available.
To Campon to a busy station:
 Press the I Will Wait softkey.
To retrieve a call when you hear the Campon tone:
 You can use the Trade Call or Call Swap feature with the (TRANS/CONF) hardkey
or a programmable line key.
Direct Paging
Direct Paging allows you to page a party through their handsfree speaker. If the paged party
has Off-Hook Voice Announce enabled, the page will be heard even when the party is on a
handset or headset call. If the paged party has Handsfree Answerback enabled and turned
on the phone, your page automatically establishes a handsfree call with the paged party.
To page a party:
1.
Lift the handset.
2.
Press the Direct Paging feature key or dial the appropriate feature access code.
3.
Dial the directory number.
4.
Speak to the dialed party after the tone.
How you answer a Direct Page depends on whether Handsfree Answerback is enabled and
turned on at your phone. See one of the following procedures in this guide:
 Direct Paging - Handsfree Answerback Enabled
 Direct Paging - Handsfree Answerback Disabled
Direct Paging - Handsfree Answerback Enabled
When you receive a Direct Page, Handsfree Answerback automatically establishes a
Handsfree call on your phone after a single burst of tone.
Your administrator enables or disables Handsfree Answerback on your phone. After your
administrator enables Handsfree Answerback, you can choose to turn it on or off directly from
your phone.
- 33 -