Maxtor WDR-516S - Manual (Page 38)

WDR-516S Installation Guide 38 Rev 1.0(93/11)
(8) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]”
after formatting.
(9) Shut down “Disk Manager” by pressing [EXIT] button.
15. Network Monitoring & Managing
WDR-516S can be accessed, controlled, and managed from remote site via Internet/Intranet.
15.1. Connecting Ethernet
1) Turn off WDR-516S’s power switch.
2) Connect WDR-516S to hub with Ethernet cable.
3) Turn on WDR-516S’s power switch.
1. Supply power to WDR-516S after connecting Ethernet cable to protect against electrical damage to
WDR-516S.
2. Check cable connection status.
3. Check LED on WDR-516S’s rear panel after supplying power.