Maxtor WDR-516S - Manual (Page 37)

WDR-516S Installation Guide 37 Rev 1.0(93/11)
14.4. Registering & Formatting HDD
“Disk Manager” will automatically run on start-up after installing a HDD.
If “Disk Manager” does not automatically run on start-up, make sure the HDD is properly installed.
(1) Press [ENTER] button at “Select Disk”.
(2) Select new added HDD (indicated as “[F]”) using [▲/▼] button and press [EXIT] button
(3) Select “Action” using [▲/▼] button and press [EXIT] button.
(4) Select “Add” using [◄ or ►] button and press [EXIT] button.
(5) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[*]”.
(6) Select “Action” using [▲/▼] button and press [EXIT] button.
(7) Select “Format” using [◄ or ►] button and press [EXIT] button.