Muratec MFX-1430 - Manual (Page 30)

2-23 Network settings
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Network settings
Server Type
Select the server type from Active Directory and Windows NT Server 4.0.
NOTE: • The DNS server should be set up when using the authentication mode
with Active Directory (Windows 2000 server/ Windows Server 2003).
• If you are using Active Directory, the “Windows Time Service” must be
activated on the Active Directory.
• The WINS settings should be set up when using the authentication mode
with Windows NT Server 4.0.
• If you are using Windows NT Server 4.0, the version must be Service
Pack 4 or later.
1
Open the authentication settings menu. (Refer to page 2-22)
2
Press [Server Type].
3
Select the server type and press [Enter].
NOTE: If you select “None”, the authentication settings will be turned off.