Smb settings, Opening the smb setting menu display, Smb settings -10 – Muratec MFX-1430 User Manual
Page 17: Opening the smb setting menu display -10, Smb.settings, Opening.the.smb.setting.menu.display
2-10
Network settings
SMB.settings
These settings are required if your LAN uses “NetBIOS over TCP/IP” protocol.
NOTE: Contact your network administrator if you are unsure about this setting.
IMPORTANT: In order to activate new settings, the machine must be rebooted after the new
settings have been entered. Turn the machine “Off” and after three or more
seconds, turn the machine back “On”.
Opening.the.SMB.setting.menu.display
1
Press [Setting] on the control panel.
2
Press [Management].
3
Press [Network Settings].