Printing a network settings list, Printing a folder shortcut list, Printing an ftp shortcut list – Muratec MFX-1430 User Manual
Page 118: Printing a network settings list -7, Printing a folder shortcut list -7, Printing an ftp shortcut list -7, 6) and view the, Printing.a.folder.shortcut.list, Printing.an.ftp.shortcut.list
7-7
Appendix & Index
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Appendix & Index
Printing.a.network.settings.list
Printing.a.network.settings.list
This lists the “LDAP Settings”, “TCP/IP Settings” and “SMB Settings”.
To print this list:
1
Press [Setting] on the control panel.
2
Press [List] g [Network Settings], in this order.
NOTE: If a Network Settings Code (see page 2-19) has been set, you must enter the
proper four-digit passcode using the numeric keys and press [Enter].
3
When the confirmation message appears, press [Yes].
The Network Settings list will be printed.
Printing.a.folder.shortcut.list
This lists shows the folder shortcut name and shortcut path.
To print this list:
1
Press [Setting] on the control panel.
2
Press [List] g [Folder Shortcut], in this order.
3
When the confirmation message appears, press [Yes].
The Folder Shortcut list will be printed.
NOTE: This button will not be active if a shortcut has not been registered.
Printing.an.FTP.shortcut.list
This list shows the FTP shortcut name and host path.
To print this list:
1
Press [Setting] on the control panel.
2
Press [List] g [FTP Shortcut], in this order.
3
When the confirmation message appears, press [Yes].
The FTP Shortcut list will be printed.
NOTE: This button will not be active if a shortcut has not been registered.