Network setting items list, Network setting items list -2, Network.setting.items.list – Muratec MFX-1430 User Manual
Page 113: Qtcp/ip.settings

7-2
Appendix & Index
Network.setting.items.list
The following network settings can be setup by using the machine’s control panel or
web browser.
• TCP/IP
This sets the TCP/IP network environment.
• SMTP/POP
This sets the e-mail server settings.
• E-mail Settings
This sets the e-mail /Internet fax settings.
• LDAP Settings
This sets the LDAP server settings.
• Folder Shortcuts
This sets the shortcut of the shared Windows holder.
• FTP Shortcuts
This sets the shortcut of the FTP server.
• Archive Settings
This creates rules for archiving “fax”, “Internet fax”, and “scan to e-mail” commu-
nications.
• SNMP Settings
This sets the SNMP settings.
• Network Settings Code
This sets the protection passcode for the network settings.
• Ping command
Ping the IP address and verify that it responds.
• Show MAC Address
Shows the MAC (Media Access Control) address of your machine’s network board.
q
TCP/IP.Settings
Item
Content
Default setting
Control
Panel
Web
Browser
NetBIOS Name
Up to 15 characters
MAC address
Work Group Name
Up to 15 characters
WORKGROUP
DHCP Setting
ON / OFF
ON
IP Address
IP address
192.168.1.10
Subnet Mask
IP address
255.255.255.0
Gateway Address1
IP address
(Blank)
Gateway Address2
IP address
(Blank)
DNS1
IP address
(Blank)
DNS2
IP address
(Blank)
DNS Suffix
Up to 50 characters
(Blank)
Primary WINS Address
IP address
(Blank)
Secondary WINS Address
IP address
(Blank)
HTTP Port No.
0 to 65535
80
(
: possible to setup.)