Mustang Survival MD0450 22 - Manual (Page 21)

1) Before repacking:
Completely deflate the Inflatable Vest with LIFT TM (see Deflation p.
10).
NOTE: Before following the repacking sequence, be sure to
properly re-arm your Inflatable Vest with LIFT
TM See Re-arming
Your PFD (p.11).
2) Ensure the oral-inflation dust cap is fitted in the stowed position
(Fig. 26).
Dust cap
position for
deflation Dust cap
in stowed
position
FIGURE 26
3) Open both front panel covers. Adjust the waist belt and chest belt
buckles to their full lengths so that the Inflatable Vest with LIFT TM is
laid out flat (Fig. 27 shows the right lobe, as worn).
FOLD #3
FOLD #1
FOLD #2
Right Lobe
FIGURE 27
Inflatable Vest with LIFT
TM
Owner’s Manual 18