Philips Magnavox CCX133AT - Manual (Page 7)

Hooking Up The TV/VCR (cont’d) 7
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO ANT.
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO
ANT.
VIDEO AUDIO
POWER VIDEO AUDIO STOP
EJECT REC
PLAY F.FWD REC/OTR VOLUME CHANNEL EARPHONE REW
• Before connecting the rod antenna (or mixing adapter or coaxial cable) to the ANT(enna) Jack, make sure the
pin is not bent. If the pin is bent, straighten it as illustrated, then connect it to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Company. The part number is 4835 3033 7006.
To order, call 1-800-851-8885.
• Audio and video cables are not supplied.
Helpful Hints
Crooked Pin Straight Pin
Bent pin
Plug Cable
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 31.
AUDIO/VIDEO Jacks
on front of TV/VCR
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO Jack
on the front of the TV/VCR.
Use a Video cable to connect the VIDEO OUT Jack on
the VCR to the VIDEO Jack on the front of the TV/VCR.
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
D.