Philips Magnavox CCX133AT - Manual (Page 31)

Rerecording (Tape Duplication) 31
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• Different brands of equipment may
operate differently.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Audio and video cables are not
included.
Helpful Hints
5
Point the remote control at the TV/VCR. Press the
(Tape) SPEED button until the desired tape speed (SP,
LP, or SLP) appears on-screen.
VIDEO
IN
OUT
AUDIO
POWER VIDEO AUDIO STOP
EJECT
REC
Source Unit
(VCR or Camcorder)
From AUDIO OUT to AUDIO
From VIDEO OUT to VIDEO
AUDIO and
VIDEO OUT
Jacks
AUDIO and
VIDEO Jacks
on TV/VCR
2
The source unit (VCR or camcorder) will play your tape. Insert a
prerecorded tape in the source unit. If playback begins, press
the STOP button on the unit.
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR
will turn on automatically.
4
Point the remote control at the TV/VCR. Press Number
buttons 0, 0 so that A/V IN appears on-screen.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit (VCR or
camcorder).
1
Make the connections shown above, using audio and video
cables.