Philips Magnavox CCX133AT - Manual (Page 47)

5
Press the STATUS/EXIT button to remove the display. A-
B REPEAT will appear on-screen. Beneath it, the letter A will flash
beside the tape counter.
.
A-B REPEAT
A 0:00:00
6
Play, fast forward, or rewind the tape to the position at
which you want to begin playback. Stop the tape, then
press the MEMORY button to set the start position (A).
The flashing A will become a flashing B.
.
A-B REPEAT
B 0:00:00
7
Play or fast forward the tape to the position at which you
want playback to end. Stop the tape, then press the
MEMORY button to set the end position (B).
● The length of time between the start position (A) and the end
position (B) must be at least three minutes.
8
The TV/VCR will immediately rewind the tape to the start posi-
tion (A) and repeat playback to the end position (B) over and
over.
(TV programming will appear while the tape is rewinding.)
A - B Repeat Playback (cont’d) 47
5
6 7
REW
PLAY
POWER
SPEED MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY PAUSE/STILL
MENU CLEAR
VCR PLUS+
SMART
SOUND
STOP
F.FWD – +
o
o
p
p
o
p
1 2 3
4 5 6
7 8 9
0 +100
• The counter cannot be memorized
or reset when you are using this
feature.
• Positions A and B will be erased
when a tape is ejected or when you
press the REC(ord)/OTR button.
• If the TV/VCR is turned off when
you are using this feature, the
TV/VCR will memorize positions A
and B.
• A-B REPEAT will not appear on-
screen at step 5 if a tape is not in
the TV/VCR. NO CASSETTE will
flash on-screen briefly.
• You cannot rewind or fast forward
beyond points A or B when you are
using this feature.
Helpful Hints