Philips Magnavox CCX133AT - Manual (Page 48)

REW
PLAY
POWER
SPEED MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY PAUSE/STILL
MENU CLEAR
VCR PLUS+
SMART
SOUND
STOP
F.FWD – +
o
o
p
p
o
p
1 2 3
4 5 6
7 8 9
0 +100
48 Real Time Counter Memory
Follow the steps below to reset the real time counter to zero at
a tape location you want to refer to later.
1
Play, fast forward or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real time counter will
appear on-screen.
3
While the counter remains on-screen, press the CLEAR
button to reset the real time counter to zero.
4
While the counter remains on-screen, press the MEMO-
RY button so that M appears on-screen. To erase a time
counter memory, press the MEMORY button so that the M disap-
pears from the screen.
1:08 PM STOP
CH10
SLP 1 : 23 : 45
5
To return to the previous point at which the real time
counter was reset to zero, when in Stop mode, press the
REW(ind)/– button. To return to the future point at
which the time counter was reset to zero, when in Stop
mode, press the F.FWD/+ button. Wait for the tape to
stop, then press the PLAY/▲ button to watch the tape.
• The time counter memory will not
function during Repeat Play mode.
Details are on page 45.
• You may only set one time counter
memory at a time. If you try to set
the time counter to zero at a sec-
ond location, the previous time
counter to zero setting will be lost.
Helpful Hints
0 : 00 : 00
M 0 : 00 : 00
1
2
4
3
5