Philips Magnavox CCX133AT - Manual (Page 39)

Timer Recording With the VCR Plus+ Programming System (cont’d) 39
• To exit the VCR Plus+ programming
system at any time, press the STA-
TUS/EXIT button. The display will
disappear from the screen.
• To stop a started timer recording,
press the STOP/EJECT button on
the TV/VCR.
Helpful Hints
4
Press the Number 1 button to record in SP speed, the
Number 2 button to record in LP speed, or the Number 3
button to record in SLP speed. Your selection will appear to
the right of REC SPEED on-screen, although SP=1 LP=2 SLP=3 will
continue to flash. For details about tape speed, see pages 29 and
51. You cannot use the (Tape) SPEED button at this time.
The TV/VCR must be off for
a timer recording to take
place! Make sure there is a
tape in the TV/VCR.
5
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF FOR TIMER RECORDING will
appear on-screen.
● If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on-screen.
● If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on-screen. If this happens,
insert a different tape.
6
Turn off the TV/VCR power. The REC(ord) light will flash. If
you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 09
TIME ON 10:30 PM
TIME OFF 11:30 PM
REC SPEED SLP
SP=1 LP=2 SLP=3
START DATE 10/10/97
FRIDAY
TO END PRESS EXIT
REW
PLAY
POWER
SPEED MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY PAUSE/STILL
MENU CLEAR
VCR PLUS+
SMART
SOUND
STOP
F.FWD – +
o
o
p
p
o
p
1 2 3
4 5 6
7 8 9
0 +100
4
5
6