Metz 34 CS-2 - Manual (Page 50)

50
Preparations
Preparazione
Preparación
The position of the operating mode selector ቧ
is of no significance for the SLAVE function in
the cordless Metz remote system.
2.7 SLAVE function switch
ቮ:
For normal flash photography, the mecablitz is mounted in
the camera’s accessory shoe and triggered by way of the
synch contact in the flash unit’s foot or a synch cable
connected to the camera. For this mode set the SLAVE fun-
ction switch
ቮ to position 0 (see fig.).
For operation as a SLAVE flash unit with cordless flash trig-
gering, the SLAVE function switch
ቮ must be set to positi-
on 1 or 2, depending upon the desired SLAVE mode. For
more details about the SLAVE modes see page 62.
☞
34CS-2 Digital für PDF 20.09.2002 9:53 Uhr Seite 50