Motorola Communications Gateway - Manual (Page 27)

22 Communications Gateway User Guide
X
Home Print Exit
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
Setting Up a USB Driver in Windows 98 SE
Be sure the Motorola Communications Gateway CD-ROM is inserted in your CD-ROM
drive before you plug in the USB cable. This CD contains the USB drivers and must be
inserted and read by the PC before you connect the Communications Gateway to the
PC.
A few seconds after you complete the USB connection, the Add New Hardware Wizard
window is displayed.
1 Click Next.
2 Be sure “Search for the best driver for your device” is selected as in the window at
bottom left.
3 Click Next.