Motorola Communications Gateway - Manual (Page 12)

7 Communications Gateway User Guide
X
Home Print Exit
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
Before You Begin
Before you begin the installation, check that you received the following items with your
Motorola Communications Gateway:
You will need 75-ohm coaxial cable (coax) with F-type connectors to connect your
Communications Gateway to the nearest cable outlet. If a TV is connected to the cable
outlet, you may need a 5 to 900 MHz RF
splitter to use both the TV and the
Communications Gateway. Both the coaxial cable and the RF splitter are readily
available at consumer electronic stores.
Item Description
Power cord Connects to the AC electrical outlet
10/100Base-T
Ethernet cable Connects to the Ethernet port
USB cable Connects to the USB port
Phone wire Connects a telephone line
Motorola
Communications
Gateway CD-ROM Contains the User Guide, USB driver , and other
items supporting your Communications Gateway