Meco BUSHMAN 7710S8.641 - Manual (Page 5)

Step 1 - Assemble Wheel Leg
Step 2 - Assemble Fixed Leg
Tools:
Threaded holes
Orient Leg.
Notice two holes
to the front.
5
Orient wheels
with protrusion
touching leg.
•Assemble Cylinder Slide Bracket to left leg using 4 M6 x 15mm Screws.
•Assemble the Cylinder Slide Lock to the Cylinder Slide Bracket using
2 Wing Bolts.
•Assemble Cart Brace to fixed leg
using 2 M6 x 50mm screws.
•Assemble Cylinder Block Wire to fixed
leg using 2 ST 4.0 x 15mm screws.
Cylinder
Slide Lock
Cylinder Slide
Bracket
Screw
M6 x 15mm
4 pcs
Wing Bolt
M6
2 pcs
Screw
M6 x 50mm
2 pcs
Screw
ST 4.0 x 15mm
2 pcs
Orient Leg.
Notice two holes
to the front.
Notice: Orient
holes closer to
this edge.
Notice orient holes
closer to this edge.
Cylinder
Block Wire
Cart Brace
•Assemble wheels and
cylinder support to
wheel leg using 2 axle
pins and 2 cotter pins.
Orient Cylinder Support
with wider spaced slots
to this side (Right).
Right
Left