Sony Ericsson T62u - Manual (Page 77)

No
t fo
r C
om
me
rci
al U
se
76 Information Transfer and Exchange
Information Transfer and
Exchange
Fax and data calls
Sending fax and data calls
To send fax and data calls you need to connect your phone
to a computer, and then start the appropriate software
program.
Receiving fax and data calls
The procedure of receiving fax and data calls depends
on your network and subscription. If you have separate
numbers for voice, fax and data calls, your phone will
recognize the type of call.
Receiving a fax or data call (separate numbers)
1 Connect your phone to a computer.
2 Answer the call from within the software program
(if it does not answer automatically).
One number
If you have a SIM card that does not support separate fax
and data numbers, the phone does not recognize the type
of incoming call.
If you want to receive a fax or data call, you have to set
the phone to one of these options. Once you have set your
phone for a specific incoming call, it stays like this until
you change it.
1 To select the call type you want your next incoming
call to be, scroll to Settings, Call Manager, Next Call.
2 Select the call type you want (Voice, Data, or Fax) and
confirm your choice.
3 Connect your phone to the computer.
4 Answer the call from within the program.
Note! You cannot answer a fax or data call manually.
Note! Once you have set your phone for a specific
incoming call, it remains set until you change it.