MITSUBISHI ELECTRIC 9700 Series - Manual (Page 24)

MITSUBISHI
ELECTRIC 9700 SERIES UPS
OWNERS / TECHNICAL MANUAL
Page Number:
2-6
MITSUBISHI ELECTRIC 9700 SERIES UPS
B) OPERATION MENU (FIGURE 2.10)
The following will be displayed when the OPERATION MENU button is pressed on
theLCD
FIGURE 2.10 Operation menu screen
1) START-UP MENU
The display indicates the operation from closing circuit breakers to starting the
inverter. When the inverter is started, the display shows the MAIN MENU. When
the display changes, the annunciator sounds 3 times requesting user to perform next
procedure.
2) STOP MENU
The display indicates the operation of how to stop the inverter and to shutdown the
UPS system.
3) EXTERNAL CONTACT INPUT
The input of external contacts is indicated by closed or open contacts.
4) DATA RECORD
Operation data and events is indicated.
5) REPORT
Record data is indicated.
6) SETUP
Time, Remote/Local selection and Equalizing charge are set.
7) SELECT UPS OUTPUT SOURCE
This display is used to transfer the UPS from inverter to static bypass for
maintenance purposes.