Mercedes-Benz 2004 CLK 500 - Manual (Page 48)

48
Getting started
Driving
Turn signals and high beam
The combination switch is located on the
left of the steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
̈ Press the combination switch up 1 or
down 2.
High beam
̈ Push the combination switch forward.
The high beam headlights are switched
on.
The high beam symbol
A in the
tachometer comes on.
For more information, see “High beam
flasher” (
୴ page 123).
Windshield wipers
The combination switch is located on the
left of the steering column.
Combination switch
1 Single wipe
2 Switching on windshield wipers
̈ Make sure the ignition is switched on.
i
To signal minor directional changes,
move combination switch to point of
resistance only and release. The turn
signal flashes three times.