Mercedes-Benz 2004 CLK 500 - Manual (Page 375)

375
Practical hints
Replacing bulbs
Low beam and high beam bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 287).
̈ Turn housing cover 1 or 2 counter-
clockwise and remove.
̈ Turn bulb holder 4 or 5 with the bulb
counterclockwise and remove.
̈ Press the bulb backwards and turn
counterclockwise out of the bulb hold-
er.
̈ Press the new bulb into the holder and
twist it clockwise.
̈ Place the bulb holder back into the
lamp and turn it clockwise.
̈ Place the corresponding housing cov-
ers back on and turn them clockwise.
Front turn signal lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 287).
̈ Twist bulb socket 3 counterclockwise
and pull out.
̈ Push bulb into socket, turn counter-
clockwise and remove.
̈ Insert new bulb in socket, push in and
twist clockwise.
̈ Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 287).
̈ Turn housing cover 2 counterclock-
wise and remove.
̈ Pull out the bulb socket with the bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Align housing cover and click into
place.