Mercedes-Benz 2004 CLK 500 - Manual (Page 354)

354
Practical hints
Opening/closing in an emergency
2 Hex wrench
̈ Insert long side of hex wrench 2 into
opening.
̈ Using hex wrench 2, press release
catch down in direction of arrow.
The roll bar extends with a loud sound.
̈ Repeat this step for the second roll bar.
Have the systems checked at your autho-
rized Mercedes-Benz Center as soon as
possible.
Lowering roll bars manually
You can lower the roll bars manually after
they have been released.
1 Orientation seam
2 Hex wrench
3 Press wrench down
4 Press head restraint down
̈ Take hex wrench out of the
Mercedes-Benz vehicle literature
pouch.
̈ Align hex wrench so that its long side is
parallel to orientation seam 1 and in-
sert hex wrench 2 into gap on left side
of respective head restraint.
̈ Press hex wrench down firmly in direc-
tion of arrow 3 and hold.
i
The rear head restraints cannot be low-
ered and the soft top cannot be opened
or closed when the roll bars have been
released.
Warning!
G
Never lower the roll bars manually unless
the soft top is open. Otherwise, the roll bars
function could be impaired, no longer reduc-
ing your risk of injury in an optimal manner.
Contact your authorized Mercedes-Benz
Center to have the roll bar lowered when the
soft top is closed.
୴୴