Mercedes-Benz 2004 CLK 500 - Manual (Page 224)

224
Controls in detail
Soft top
Installing
̈ Remove the wind screen from its stor-
age bag.
1 Upper section
2 Lower section
̈ Fold sections 1 and 2 together.
3 Catch
4 Retainer claw
5 Snap fastener
̈ Press retainer claw 4 on upper sec-
tion into snap fastener 5 of lower sec-
tion.
6 Retaining lugs
7 Mounting fixture on right side
8 Catch
̈ Fold retaining lugs 6 out.
̈ Slide pre-assembled wind screen into
mounting fixture on right side 7 using
retaining pin on right side. Simulta-
neously, retaining lugs 6 should slide
into seat belt passage in rear bench
seat.