M-AUDIO Axiom Pro - Manual (Page 44)

|
39 Axiom Pro User Guide
Parameter: Channel
Value Range: Global, 1-16, Zone 1-4
This parameter sets the MIDI output channel of the encoder group The parameter can be set in the
following ways:
• Global This sets the “group” MIDI channel for the encoder knobs to the same channel as
specified on the Edit > Global page
• 1-16 This sets the “group” MIDI channel for the encoder knobs to a channel between
1 and 16
• Zone 1-4 This sets the “group” MIDI channel for the encoder knobs to the same channel as
used by the selected keyboard zone (1 through 4) (see Edit Mode > Zones > Data
to learn how to set these output channels)
Parameter: Accel Max
Value Range: 0-10
When the Axiom Pro encoders are turned slowly, their associated parameters update in single-
step increments However, as the encoders are turned quickly the parameters update in multi-step
increments and let you make large changes with only one or two fast turns of an encoder
The Accel Max setting determines the maximum speed at which parameters will update as an
encoder is turned quickly The default setting is “5” To make encoders more precise (but less
sensitive) at high speed, reduce this setting Conversely, to make encoders more sensitive (but less
precise) at high speeds, increase this setting
Parameter: 1-4
Value Range: (varies)
Encoder knob and drum pad groups can up to four profiles allowing you to quickly and easily control
up to 32 parameters When viewing this page in Edit Mode, a selected profile can be enabled and
disabled using the “+” and “-“ buttons Pressing Soft-Key 4 (Edit) lets you edit the name of the
selected profile
To learn more about entering or changing Name parameters, see the box titled “Editing Name
Parameters” in the “Edit Mode > Control” section