M-AUDIO Axiom Pro - Manual (Page 36)

|
31 Axiom Pro User Guide
About the “Channel” sub-parameter:
This parameter sets the MIDI output channel of the selected control The
parameter can be set in the following ways:
• Global Your selected control will transmit on the global MIDI channel
as specified on the Edit > Global page
• 1-16 Your selected control will transmit on a MIDI channel between
1 and 16
• Zone 1-4 Your selected control will transmit on the same MIDI channel used by the chosen keyboard zone (1 through 4)
(see Edit Mode > Zones > Data to learn how to set these output channels)
• Group Your selected control will transmit on the same MIDI channel as set for its associated group of controls
(e g encoder group) See Edit > Group to learn how to set a MIDI channel for a group of controls
✓ NOTE: Axiom Pro allows you to assign any control to any MIDI channel through the
Edit Mode > Control menu. However, please note that certain MIDI devices reserve
channel 10 for drums and percussion. Appendix E6 features a General MIDI drum
map table to show you how drum sounds are commonly assigned to the keys of
controllers. Please refer to your device’s documentation to learn more about this.