beautypg.com

Base station front panel, Mic input select switch, Instrument input select switch – MACKIE PORTABLE RECORDING PREAMP User Manual

Page 20: Line input 1 select switch, Line input 2 select switch, Onyx s at ellit e, Line input select switch

background image

0

ONYX Satellite

ONYX S

at

ellit

e

16. MIC Input Select Switch

Press this button to select the XLR Mic input as the

input source for the channel.

17. Instrument Input Select Switch

Press this button to select the Instrument input (

)

as the input source for the channel.

Note: The instrument switch on the pod must also be
pushed in to select the instrument input.

18. Line Input 1 Select Switch

Press this button to select LINE 1 as the input source

for the channel.

19. Line Input Select Switch

Press this button to select LINE 2 as the input source

for the channel.

Note: You can select and combine the
Mic, Instrument, Line 1, and Line 2
inputs for each channel from the base
station. However, the base station has
no provision for matching the imped-
ances or the input level of the com-

bined signals, so it is best only to combine similar signals
(for example, line-level signals connected to Input 1 and
Input 2), or to select only one input at a time.

Base Station Front Panel

When the pod is connected to the base station, some

additional features become available above and beyond
those that are present when using the pod by itself.

• More inputs are available to select for each channel

(Mic, Instrument, Line 1, and Line 2)

• An insert jack (send/return) is available for each

channel

• An additional stereo control room output is avail-

able (A and B)

• Four more line-level outputs are available (for a

total of six, including the control room outputs)

• A separate control room level control can operate

on just the A/B outputs, or on all six outputs as a
master level control

• The control room source can be switched between

the Core Audio/ASIO streams 1 and 2 from the DAW
software application, and the inputs from the Onyx
Satellite

• A built-in Talkback Mic is available for routing to

the phones and to the DAW application

Note: The base station does not func-
tion when the pod is removed. The pod
is the “brains” and the base station
simply provides more connections and
controls than the pod does by itself.

O

O

LEVEL

MAX

ON

TALKBACK

1

2

CONTROL ROOM

O

O

LEVEL

MAX

SOURCE

TO

PHONES

TO

DAW

A

B

1-2

1-6

DAW

INPUTS

2

1

MIC

2

1

MIC