Muratec Multi Functional Printer MFX-C2500 - Manual (Page 121)

Installing Printer Software in Windows
10
3
Click Next.
• If necessary, select a language from the drop-down list.
4
Select Custom installation. Click Next.
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then
click Next.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
To verify your printer’s IP address or the MAC address,
print a Network Configuration page in machine.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
N OTE : If you cannot find your machine in network, please turn
off the firewall and click Update.
For Windows operating system, click Start → Control Panel
and start windows firewall, and set this option unactivated.
For other operating system, refer to its on-line guide.
T IP : If you want to set a specific IP address on a specific
network printer, click the Set IP Address button. The Set IP
Address window appears. Do as follows:
a. Select a printer to be set with a specific IP address from the
list.
b. Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
c. Click Next.
You can also set the network printer via SyncThruTM Web
Service, an embedded web server. Click Launch SWS on
Set IP Address window. Your machine’s embedded website
opens.
6
Select the components to be installed. After selecting the
components, the following window appears. You can also
change the printer name, set the printer to be shared on