Monarch Instrument 9401 - Manual (Page 29)

7. Replacing the Fuse
CAUTION
As a safety measure, be sure to turn the printer Off and
unplug the power cord.
1. Turn the printer Off and unplug the power cord.
Facing the back of the printer, press and turn the fuse
cover as shown until it pops out.
3. Pull the fuse out of
the cover.
4. Insert a 1.5 amp,
250V slow blow fuse
into the fuse cover
and push until the
fuse is fully seated.
Fuse
Cover
Power
Switch
25