Cleaning the printhead and platen roller – Monarch Instrument 9401 User Manual
Page 27
6. Cleaning the Printhead and
Platen Roller
WARNING
Turn the power Off and unplug the cord before cleaning.
1. Open the cover by lifting the handle and pulling it
completely around the top of the printer.
2. Move the printhead lever as shown to open the printhead.
3. Wind the supplies back onto the supply roll. If backing
paper is rewound on the backing paper take-up reel, tear it
as described in "Loading Supplies."
4. Remove the ribbon, if one is loaded. See "Loading the
Ribbon" in this manual.
Printhead
Lever
Handle
23