MicroNet Technology Network Device RAIDBank4 - Manual (Page 45)

RAIDBank4 Owner’s Manual 45
Chapter 5 - Host Computer Setup
This chapter is an overview of setting up storage volumes on Macintosh and Windows
based computers. To ensure complete installation and ease of use, take a few minutes
to read this chapter before installation.
1. Volume Setup on Apple Macintosh
Installation on a MacOS system requires MacOS X or greater, and any of the
following:
1. Compatible SATA Host Bus Adapter with external ports.
2. USB 2.0 port
! Before you begin, please make sure you are logged in with administrative
privileges. If you are unsure about your privilege level, please consult your
Macintosh OS-X user manual or with your system administrator.
1.1 Launch the “Disk Utility” application located under Applications/Utilities folder.
1.2 Highlight your new drive and select the “Partition” tab
1.3 Select the new partition map type.
1.4 For each partition in the volume scheme, select the desired file system
format and volume name (optional)
1.5 Click the “Options” button. Select “Apple Partition Map” in the dialog box and click “OK”.
1.6 Click “Apply.” Your RAIDBank4 is ready to use!
5-Host Computer Setup
1.2
1.3
1.3 1.4
1.5
1.6