MicroNet Technology Network Device RAIDBank4 - Manual (Page 43)

RAIDBank4 Owner’s Manual 43
5.7 Generate Test Event
The RAIDBank4 can generate test events to confirm remote notifications are properly working.
To generate a test event, select “Generate Test Event,” check the box labelled “Confirm the
operation” and click the
Button.
5.8 Clear Event Buffer
Select “Clear Event Buffer” to clear the event log. Check the box labelled “Confirm the
operation” and Click the
Button to finalize or to revert all options to default.
5.9 Modify Password
The RAIDBank4’s administrative functions can be protected with a password. To set or change
the RAIDBank4 password, select “Modify Password”. The following screen has three fields-
Enter original password, Enter New Password, and Confirm (Re-Enter) New Password. Type the
current password in the “Enter Original Password” field (leave blank if no current password
defined.) Enter and reenter the new password in the next two fields (the entries are case
sensitive) to set a new password. To complete the operation, check the box labelled “Confirm
the operation” and Click the
Button to finalize or to revert all options to default.
5.10 Upgrade Firmware
The RAIDBank4’s firmware (operating control software) can be field upgradable. MicroNet
Support may direct you as to the operation of this option.
5.11 Restart Controller
To reset the RAIDBank4, select “Reset Controller” , check the box labelled “Confirm the
operation” and Click the
Button to finalize or to revert all options to default.
4-RAID Control-Web Interface