Mercedes-Benz 2005 E 320 CDI - Manual (Page 92)

90
Safety and Security
Driving safety systems
Switching on the ESP
̈ Press ESP button 1.
The ABS/ESP warning lamp v in
the instrument cluster goes out.
You are now again in normal driving
mode.
SBC brake system
The SBC brake system combines a hydrau-
lic brake circuit with electronically con-
trolled brake servo assistance. You have
increased braking safety and improved
braking comfort.
Warning!
G
When the ABS/ESP warning lamp v is
illuminated continuously, the ESP is
switched off.
Adapt your speed and driving to the prevail-
ing road conditions and to the non-operating
status of the ESP.
!
Avoid spinning of a drive wheel for an
extended period with the ESP switched
off. This may cause serious damage to
the drivetrain which is not covered by
the Mercedes-Benz Limited Warranty.
!
Turn on the ESP immediately if the
aforementioned circumstances do not
apply anymore.
Warning!
G
Never ignore a brake malfunction indicated
in the speedometer display, for example by
the
; (USA only) or 3 (Canada only)
warning lamp. Refer to the “Practical hints”
section (
୴ page 358). Also read and ob-
serve the messages in the instrument clus-
ter display (
୴ page 367).