Mercedes-Benz 2005 E 320 CDI - Manual (Page 161)

159
Controls in detail
Control system
Selecting display (speed display or out-
side temperature) for basic display
̈ Move the selection marker with
the
æ or ç button to the
Instr.
cluster submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Basic display .
The selection marker is on the current
setting.
̈ Press button æ or ç to select
the display permanently shown in the
multifunction display.
Tire pressure display*
Use this function to set the unit for the tire
pressure display.
̈ Move the selection marker with the
æ or ç button to the
Instr,
cluster submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Display unit Tire pressure .
The selection marker is on the current
setting.
̈ Press button æ or ç to select
the desired tire pressure unit.
Time/Date submenu
Access the Time/Date submenu via the
Settings menu. Use the Time/Date sub-
menu to change the time and date display
settings. The following functions are avail-
able:
Function Page
Synchronizing the time 160
Set time (hours) 160
Set time (minutes) 160
Set date (month) 161
Set date (day) 161
Set date (year) 161
i
Information on setting the time, refer to
separate COMAND instructions.